FINITURA IDROREPELLENTE

IDRO SEALER

IDRO SEALER is a clear penetrating water-borne water/oil repellent topcoat, based on special acrylic and polyurethane polymers, it is suitable for the treatment of interior and exterior surfaces, under any environmental conditions. IDRO SEALER can be applied to any kind of mineral support, including bare concrete, reinforced and cellular concrete, sandy or calcareous stone, bricks and lime plasters.

IDRO SEALER is not recommended on old paint organic coatings, unabsorbent supports (polished marble and granite) and gypsum.

Decorative blue and light blue floral stencil with a central dome, ideal for lime-based painting.

Modern Living Room With Textured Grey Accent Wall and Cozy Decor

Minimalist interior with a black poodle sitting on a wooden bench.

Idro Sealer

Lime based surface: 8 – 10 m²/lt ( 86 – 108 ft²/lt )

Other: 15 – 18 m²/lt ( 161 – 193 ft²/lt )

Brush

1-2 coats

Dilute with water

Roller

Spray

Safety Data Sheet

MSDS D015ENG_IDRO SEALER

PDF

Technical Data Sheet (English)

MTDS 015ENG_IDRO SEALER

PDF

Technical Data Sheet (Italian)

MTDS 015ITA IDRO-SEALER

PDF

Idro Sealer

A crystal-clear, water-based sealant designed to protect without altering the natural finish. Perfect for refined interiors exposed to moisture and daily use.

Idro Sealer – Frequently Asked Questions

What surfaces is Idro Sealer best suited for?

Decora Idro Sealer is a clear, penetrating, water-borne water/oil repellent topcoat formulated with special acrylic and polyurethane polymers. It is suitable for treating both interior and exterior surfaces under various environmental conditions. The sealer can be applied to a wide range of mineral substrates, including bare concrete, reinforced and cellular concrete, sandy or calcareous stone, bricks, and lime plasters.

How should Decora Idro Sealer be applied for optimal results?

For best results, apply Decora Idro Sealer using a brush, roller, or spray equipment. The product should be diluted with water before application. Typically, one to two coats are recommended, depending on the porosity of the substrate. Ensure the surface is clean and dry before application.

What is the coverage rate of Decora Idro Sealer?

The coverage of Decora Idro Sealer varies based on the type of surface:

Lime-based surfaces: Approximately 8–10 m² per liter (86–108 ft² per liter).
Other mineral substrates: Approximately 15–18 m² per liter (161–193 ft² per liter).

Are there any surfaces where Decora Idro Sealer should not be applied?

Yes, Decora Idro Sealer is not recommended for use on:

Old paint or organic coatings.
Unabsorbent supports such as polished marble and granite.
Gypsum surfaces.

Is Decora Idro Sealer eco-friendly?

Decora Idro Sealer is a water-based product, which generally indicates lower levels of volatile organic compounds (VOCs) compared to solvent-based alternatives. This formulation contributes to a safer application process and reduced environmental impact. However, for specific environmental certifications or VOC content, please refer to the product’s technical data sheet.

Where Can You Use Idro Sealer?

Best Applications for Idro Sealer on Floors, Walls & More

Finitura Idrorepellente walls

Use Finitura Idrorepellente on interior or exterior walls to shield against moisture while preserving the texture and color of decorative coatings.