is ready-to-use. Mix well before use.

Clean carefully the surface (with jet spray water if necessary) and remove any mold, if present.

Once the support is completely dry, apply IDRO SEALER, by brush or spray, until saturation of the surface.

Several coats may be required before the saturation is reached.

Avoid the dropping formation.

Air and support surface conditions:

• Air temperature: Min. +5°C / Max. +35°C
• Relative environmental humidity: <75%
• Support surface temperature: Min. +5°C / Max. +35°C

Avoid applying under direct sunlight, and in the presence of the condensation on the surface.

Protect the treated surface from the rain for at least 24 hours after the application.

shows the maximum performance action after 24 hours from application.